BAT TECH COP Ignition Coil Electrical Voltage Tester Automotive Diagnostic Rod [BTR101]
BAT TECH COP Ignition Coil Electrical Voltage Tester Automotive Diagnostic Rod [BTR101]
FEATURES:
Advanced technologies, designed for non-invasive inductive contact with electrical / electronic circuits
LED lights and audible warning tones report back as to the condition of the device under test conditions
SUPPORTS:
Spark Ignition H/T Coil and multiple-applications:
COP Coil On Plug
CNP Coil Near Plug
DECOP Double Ended Coil on Plug
PTC Plug Top Coil
WPS Wasted Plug System
Supports diagnosis with High-Tension coils
Double spark
Single spark
Spark plug
And more …
TESTING GUIDE:
Red LED Light …
Consistent, steady flashing and beeping indicates the COP is producing the correct amount of VOLTAGE. No response or an inconsistent response indicates the COP is NOT producing the correct amount of VOLTAGE.
This may be caused by one of the following (but not limited to):
1. fouled spark plugs, or incorrect gap
2. damaged / corroded wires or connectors
3. faulty coil or PCM
Green LED Light …
Consistent and steady flashing indicates the duration of the ARC is correct
No response or an inconsistent response indicates the duration of the ARC is NOT correct
This may be caused by one of the following (but not limited to):
1. shorted windings inside the coil
2. resistance or bad connections in the primary / secondary connections
3. faulty coil
KIT INCLUDES:
1 * automotive COP test probe (see photos)
1 * guide
1 * carry case
Note: This tester is powered by 3 Volt button battery [not included]
Images are representative